8011 bottle cap aluminium sheet materials

Basic Info.

Model NO.	8011
Alloy	Alloy
Transport Package	Wooden Case, Wooden Pallet
Trademark	HM
Origin	China
HS Code	7606129000
Production Capacity	4000tons/Year

Product Description

8011 bottle cap aluminium sheet materials
Specification
1) Width and length: Cut as per customer's requirement
2)Thickness: 0.18-0.3mm
3) Alloy: 8011
4) Temper: H14 H16
5) Color: Various colors are available as per customer's requirement
6) Packaging detail: Wooden box or plastic wrap
3105 Aluminum alloy sheet is essentially a 98% aluminum alloy with minor additions to increase strength over that of alloy 1100 and 3003, It is not hardenable by heat treatment and it has good corrosion resistance, formability and wedability.
Alloy: 3105Temper: O, H111, H112, H12,H14, H16, H18, H22, H24, H26Thickness: 0.2mm--200mmWith: 500mm--2000mmLength: 1000mm--12000mmSurface: Mill finish, Bright finish, paper interleaved, one side film, both sides film.

Specifications

Alloy	Temper	Thickness	Width	Length	Coil	Strip	Earing	Diagonal
8011, 3105	H14, H16, H24, H26	0.15~0.25 mm (+/-0.005mm)	500~1000 mm (+0.5mm, -0mm)	500~1000 mm (+0.5mm, -0mm)	500~1000 mm	20~500 mm	1	≤ 1mm

Chemical Compostions

Alloy	Fe	Si	Cu	Mn	Mg	Cr	Zn	Ni	Ti	Other		Al
										Each	Total
8011	0.60~1.0	0.50~0.9	0.1	0.2	0.05	0.05	0.1	-	0.08	0.05	0.15	Remain
3105	0.7	0.6	0.3	0.3~0.8	0.2~0.8	0.2	0.4	-	0.1	0.05	0.15	Remains

Mechanical Property

Alloy	Temper	Thickness (mm)	U.T.S (Mpa)	Elongation (%)
8011	H14	0.15~0.25	185~205	>=2

Mechanical Property for Direct Casting

Alloy	Temper	Thickness (mm)	U.T.S (Mpa)	Elongation (%)
8011	H14	0.15~0.25	125~155	>=2
3105	H14	0.15~0.25	150~200	>=1

Application of 3105 8011 Color Printed Aluminum Sheets
vial aluminium seals,aluminium tear off seal,aluminium flip-off vial seals, aluminium closures, pharmaceutical caps, pull-off aluminum cap, aluminum seal cap for injection vial,aluminum cap for injection bottle. ROPP cap, PP cap, roll on pilfer proof cap, aluminum pilfer-proof cap, pilfer proof closure, aluminum bottle cap, aluminum screw cap, tear off caps, flip off caps.

Packing
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.

The supplierof choice - Haomei Aluminium

Haomei 8011 3105 aluminum sheet aluminium PP Caps Sheet are suitable for both transparent and non-transparent lacquering, and will not bend during curing process. For applications requiring deep drawing, such as long caps, Haomei aluminium closure sheets show very low earing, greatly reducing scrap rate for our clients.
Haomei Aluminum closure sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.